"it's possible to reconfigure u-boot (etc) to have the OS on the Card's
micro-sd."
"On boards with dedicated storage for the firmware, the/Tow-Boot/build
should be independent from, and not care about the installed system media."
Send arm-netbook mailing list submissions to
arm-netbook@lists.phcomp.co.uk
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
or, via email, send a message with subject or body 'help' to
arm-netbook-request@lists.phcomp.co.uk
You can reach the person managing the list at
arm-netbook-owner@lists.phcomp.co.uk
When replying, please edit your Subject line so it is more specific
than "Re: Contents of arm-netbook digest..."
Today's Topics:
1. Re: next step is a boot image (Andreas Grapentin)
2. Re: next step is a boot image (Luke Kenneth Casson Leighton)
3. Re: next step is a boot image (Andreas Grapentin)
4. Re: next step is a boot image (Luke Kenneth Casson Leighton)
5. Re: next step is a boot image (Pablo Rath)
6. Re: next step is a boot image (Pablo Rath)
7. Re: Fwd: Where are the 93 Computer Cards ? (Pablo Rath)
8. Re: next step is a boot image (Andreas Grapentin)
Message: 1
Date: Mon, 16 Jan 2023 19:55:47 +0100
From: Andreas Grapentinandreas@grapentin.org
To: Eco-Conscious Computingarm-netbook@lists.phcomp.co.uk
Subject: Re: [Arm-netbook] next step is a boot image
Message-ID:ED1673BE-4B32-4CB9-B176-CD881100B059@grapentin.org
Content-Type: text/plain; charset=utf-8
On 13. Jan 2023, at 04:12, Luke Kenneth Casson Leightonlkcl@lkcl.net wrote:
On Thursday, January 12, 2023, Andreas Grapentin <andreas@grapentin.org mailto:andreas@grapentin.org>
wrote:
On 12. Jan 2023, at 15:44, Luke Kenneth Casson Leightonlkcl@lkcl.net
wrote:
On Thursday, January 12, 2023, Andreas Grapentinandreas@grapentin.org
wrote:
I'm curious -- does the old parabola image no longer work??
from 2016? unfortunately the MicroSD card with the only
copy destroyed itself.
I still have a copy, I think. I’ll go looking for it.
yes please. do you use bittorrent, can you publish a magnet link?
i will grab and seed it if you do?
I’ve found the parabola image I used back in 2021, and tried to boot it on an EOMA card revision 2.7.4 and a microdesktop revision 1.7
In the process of attaching peripheries, I must have blown something on the microdesktop, the power LED no longer lights up, tested multiple chargers. I’m fairly certain that the LED did light up green when I started working on the board today. Is it possible that I blew a fuse somewhere?
Apart from that, I currently can’t get the system to boot. I have output from the boot loader, but it’s not much:
U-Boot SPL 2017.01-2 (Jan 18 2017 - 21:30:38)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC2MMC Device 1 not found
spl: could not find mmc device. error: -19
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
This is when I insert the sd card in the EOMA card directly. When I insert the sd card into the microdesktop, I don’t get anything. Still working on it though.
I’m confident that this is salvageable, considering that I do get boot loader output through UART. I’ll keep looking into it. If you have any hints, I’d appreciate it.
in the meantime, I’ll prepare a magnet link / http direct download for the image I’m using, in case it’s useful for someone else. I’ll send those links to the list ASAP.
Best,
Andreas
Message: 2
Date: Mon, 16 Jan 2023 19:01:03 +0000
From: Luke Kenneth Casson Leightonlkcl@lkcl.net
To: Eco-Conscious Computingarm-netbook@lists.phcomp.co.uk
Subject: Re: [Arm-netbook] next step is a boot image
Message-ID:
CAPweEDxrHiGLFry5ex3P7DXoBDvnavfSxcCx_R7U05QTWF4PXQ@mail.gmail.com
Content-Type: text/plain; charset="UTF-8"
On Mon, Jan 16, 2023 at 6:56 PM Andreas Grapentinandreas@grapentin.org wrote:
I’ve found the parabola image I used back in 2021, and tried to boot it on an EOMA card revision 2.7.4 and a microdesktop revision 1.7
brilliant
In the process of attaching peripheries, I must have blown something on the microdesktop, the power LED no longer lights up, tested multiple chargers. I’m fairly certain that the LED did light up green when I started working on the board today. Is it possible that I blew a fuse somewhere?
yes it should. no there's no fuse. you'll need a multimeter, be *careful*.
i suggest taking the Card out. if it's really borked you can power it
with a 5V USB "charger" cable (into the 2 standard USB sockets).
also, check you inserted the Card correctly: not one row along or one
pin along, and make sure no contact between the two PCBs.
Apart from that, I currently can’t get the system to boot. I have output from the boot loader, but it’s not much:
U-Boot SPL 2017.01-2 (Jan 18 2017 - 21:30:38)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC2MMC Device 1 not found
spl: could not find mmc device. error: -19
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
ok if you've no power on the MD then the Level Shifter IC will not
be powered up and the MicroSD card socket obviously
will not be recognised.
I’m confident that this is salvageable, considering that I do get boot loader output through UART. I’ll keep looking into it. If you have any hints, I’d appreciate it.
it's possible to reconfigure u-boot (etc) to have the OS on the Card's micro-sd.
in the meantime, I’ll prepare a magnet link / http direct download for the image I’m using, in case it’s useful for someone else. I’ll send those links to the list ASAP.
awesome.
l.
Message: 3
Date: Mon, 16 Jan 2023 20:10:08 +0100
From: Andreas Grapentinandreas@grapentin.org
To: Eco-Conscious Computingarm-netbook@lists.phcomp.co.uk
Subject: Re: [Arm-netbook] next step is a boot image
Message-ID:BE68C5FA-7F51-4F90-ADF8-DB4F8456508B@grapentin.org
Content-Type: text/plain; charset=utf-8
On 16. Jan 2023, at 20:01, Luke Kenneth Casson Leightonlkcl@lkcl.net wrote:
On Mon, Jan 16, 2023 at 6:56 PM Andreas Grapentinandreas@grapentin.org wrote:
In the process of attaching peripheries, I must have blown something on the microdesktop, the power LED no longer lights up, tested multiple chargers. I’m fairly certain that the LED did light up green when I started working on the board today. Is it possible that I blew a fuse somewhere?
yes it should. no there's no fuse. you'll need a multimeter, be *careful*.
i suggest taking the Card out. if it's really borked you can power it
with a 5V USB "charger" cable (into the 2 standard USB sockets).
also, check you inserted the Card correctly: not one row along or one
pin along, and make sure no contact between the two PCBs.
forgot to mention, I’m using the expansion header on the micro desktop for the UART connection. Power to the EOMA card directly through the microUSB works, that’s what I’m doing right now. I haven’t tried the USB sockets on the micro desktop though, that might be worth a shot.
I’m confident that this is salvageable, considering that I do get boot loader output through UART. I’ll keep looking into it. If you have any hints, I’d appreciate it.
it's possible to reconfigure u-boot (etc) to have the OS on the Card's micro-sd.
I believe I’m using a quite old u-boot boot script. Included below. I’m not too familiar with u-boot, any tips what needs to be changed to switch the microSD slot, or maybe include a fallback option to try booting from the internal microSD if the external one is unavailable?
if test -n ${distro_bootpart}; then setenv bootpart ${distro_bootpart}; else setenv bootpart 1; fi
part uuid ${devtype} ${devnum}:${bootpart} uuid
setenv bootargs console=${console} root=PARTUUID=${uuid} rw rootwait
if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/zImage; then
if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtbs/${fdtfile}; then
if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img; then
bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
else
bootz ${kernel_addr_r} - ${fdt_addr_r};
fi;
fi;
fi
Message: 4
Date: Tue, 17 Jan 2023 04:29:06 +0000
From: Luke Kenneth Casson Leightonlkcl@lkcl.net
To: Eco-Conscious Computingarm-netbook@lists.phcomp.co.uk
Subject: Re: [Arm-netbook] next step is a boot image
Message-ID:
CAPweEDyfDVVRnqrycPhms+Q15e-dO75EmVuvNwywz-SW5gQPgQ@mail.gmail.com
Content-Type: text/plain; charset="UTF-8"
On Monday, January 16, 2023, Andreas Grapentinandreas@grapentin.org
wrote:
On 16. Jan 2023, at 20:01, Luke Kenneth Casson Leightonlkcl@lkcl.net
wrote:
On Mon, Jan 16, 2023 at 6:56 PM Andreas Grapentinandreas@grapentin.org
wrote:
In the process of attaching peripheries, I must have blown something on
the microdesktop, the power LED no longer lights up, tested multiple
chargers. I’m fairly certain that the LED did light up green when I started
working on the board today. Is it possible that I blew a fuse somewhere?
yes it should. no there's no fuse. you'll need a multimeter, be
*careful*.
i suggest taking the Card out. if it's really borked you can power it
with a 5V USB "charger" cable (into the 2 standard USB sockets).
also, check you inserted the Card correctly: not one row along or one
pin along, and make sure no contact between the two PCBs.
forgot to mention, I’m using the expansion header on the micro desktop
for the UART connection.
yep ido that.
Power to the EOMA card directly through the microUSB works, that’s what
I’m doing right now.
the SY6280 is *only* powered by the 5v MD Power rail.
you *cannot* power the MD through the USB-OTG and if it
was possible it would damage everything as the power
drain would be exceeded.
the 5v rail connects to 3.3v which then powers the
Level Shifter and the microsd socket.
you abolutely cannot expect the VREF of the Card to
power the microsd socket.
it is imperative that you provide independent 5v power.
I haven’t tried the USB sockets on the micro desktop though, that might
be worth a shot.
if 12v is not working it will be your only option.
it's possible to reconfigure u-boot (etc) to have the OS on the Card's
micro-sd.
I believe I’m using a quite old u-boot boot script.
that is irrelevant. u-boot-spl.bin is what needs compiling
and that is done with compile options. "make config".
i think.
you need to establish which phase has been achieved.
there are MULTIPLE phases.
EVERY ONE OF THEM needs properly configuring.
l.
Giovanni Lostumbo